COMPANY ESTABLISHMENT: A. Taiwan: Company start up in 1966 The 1st factory in 1980 The 2nd factory in 1984 The 3rd factory in 1990 The 4th factory in 1998 (Kwan Miao Factory) B. China: Zhongshan factory in 1992 Shanghai factory in 1999 Kung Shan Company (Original "Kung Shan office" , from 2008/04/08 rectifying names.)

PRODUCTION HISTORY FOR PLASTIC INJECTION MOLDING MACHINES:
Over 40 years
CAPITAL (Registered):
Taiwan orporation: US$5,200,000.-
Chian corporation: US$3,930,000.-

AREAS:
4 factories in Taiwan with total lands:52000M² total production areas:28000M²
2 factories in China with total land: 39000M² total production area:19100M²

EMPLOYEES:
200 employees in Taiwan
600 employees in China
MACHINE MODELS AVAILABLE:
a. Produced in Taiwan: 50~4000T with higher accuracy
b. Producted in China: 80~1600 T for general purpose
PRODUCTION:
The year of 2002:720 units of plastic injection molding machines from Taiwan factories and 600 units from China factories.
ANNUAL TURNOVER:
US$33,000,000.- in 2001 and US$40,600,000.-in 2002

THE MAJOR EXPORT MARKET:
Taiwan, Mainland China, India, Pakistan, Malaysia, Thailand, Vietnam, Indonesia , Russia, Turkey , Egypt, Saudi Arabia, France , U.S.A., Morocco, Brazil, Argentina, Australia, Colombia, Bangladesh,...etc.

AWARD RECORD & SUPERIOR QUALITY PRIZES(DESIGN AND DEVELOPMENT):

a.	1966	Made the first injection molding machine.
b.	1983	Made the biggest machine in Taiwan. It is 2000Tons clamping force and 360 Oz injection capacity.
c.	1986	Prize of A-class QUALITY CONTROL Factory. Applied computer controller in the injection molding machines .
d.	1989-1990	Prize of CHAMPION EXPORTER in plastic injection molding machines.
e.	1991	Prize of "GOLD DRAGON".
f.	1993	Prize of "GOOD PRODUCT DESIGN AWARD".
g.	1994	Prize of "IT'S" VERY WELL MADE IN TAIWAN".
h.	1997	Pass the ISO 9001 inspection.
i.	1998	Pass the CE conformity of type-examination certificate for T series . Design TW series injection molding machines. Developing double circuits and triple circuits machines .
j.	1999	Developing hydraulic servo high speed closed loop injection molding machines.
k.	2000	Design multi-material / multi-colors injection molding machines .
l.	2001	Design TY series injection molding machines .
m.	2003	Pass the CE conformity of type-examination certificate for TY series . Patent Certificate of " Improvement in mold locating mechanism".
n.	2005	Patent Certificate of "Water assisted Injection Molding technique".
o.	2006	Patent Certificate of "Hold Pressure Multi-Circuit Structure".
p.	2007	Patent Certificate of "Injection-Blow Structure device". Patent Certificate of "Outward Toggle Mechanism Injection Molding Machines" .
q.	2008	Patent Certificate of "Tie bar pull-out mechanism". Patent Certificate of " Sandwich internal supercritical foaming Injection Molding Devices and Method.